• Before first use, disassemble all bottle parts and wash them with warm soapy water.
• We recommend sterilizing the parts in boiling water for approximately 5 minutes. Allow all parts to air dry naturally after sterilization.

• Sterilization is required before first use.
• After that, frequent sterilization is not necessary. However, for babies under 6 months old with developing immune systems, regular sterilization is recommended.
• After 6 months, sterilizing about once a week is generally sufficient.

• Yes. Our bottles are designed to be microwave sterilizer compatible. Before microwave sterilization, always separate the nipple, ring, and cap.

• Yes. Voglia bottles are dishwasher safe. For best results, place the bottle components on the top rack of the dishwasher.

• Nipples generally should be replaced every 3 months, depending on usage.
  If there are visible signs of wear, damage, or deformation, replace them sooner.
• Bottles are recommended to be replaced every 6 months.

• Choose the nipple flow according to your baby’s age and feeding pace.
  Newborns should use Slow Flow nipples. As your baby grows, Medium or Fast Flow nipples may be more suitable.
• Recommended stages:
  Stage 1: 0–3 months
  Stage 2: 3–6 months
  Stage 3: 6+ months
  Stage 4: Y-Cut / 6+ months
  * Please note that these are general recommendations and may vary depending on your baby’s individual feeding needs.

• Milk leakage may occur if the nipple and ring are not assembled correctly.
  Please make sure all parts are aligned properly and securely tightened.
• If the issue continues, please contact us through our support page.

While odors may not always be removed completely, the following methods may help:

• Baking Soda
  Boiling Method : Add 1 teaspoon of baking soda to boiling water and sterilize the bottle for about 5 minutes. Then allow it to air dry.
  Soaking Method : Fill the bottle with warm water, add 1 teaspoon of baking soda, and soak overnight. Wash thoroughly afterward.
• Vinegar Solution
  Soaking : Mix warm water and vinegar at a 1:1 ratio and soak the bottle for at least 4 hours, preferably overnight.
  Cleaning : After soaking, wash thoroughly with warm water and mild soap.
• Sun Drying
  Drying the bottle under sunlight may help reduce odors naturally.
• Heat Sterilization
  Sterilize the bottle in boiling water for about 5 minutes. Repeat if necessary.

• Yes!
  Our silicone bottles are made with Volatile-Free silicone and BPA-Free plastic materials to help ensure safety from harmful substances.
  The bottle design also prevents milk from contacting plastic parts during feeding.
• We regularly test our products through certified third-party laboratories to ensure compliance with safety standards.
  
• Certifications:
  LFGB, CPSIA SEC(101,108)
  FDA 21CFR (177.1520, 177.2600)
  EN-14350:2020

1. Always wash and sterilize the bottle after use.
2. Use bottle-specific detergents. Avoid abrasive or alcohol-based cleaners.
3. When using a dishwasher, place the bottle components on the upper rack.
4. Inspect all components before use and discontinue use if any parts show damage.